Table of Contents
Advertisement
Charging the Battery Pack Before Use
With the battery attached and the compact power adapter connected, turning SELPHY
off starts charging, and [
Fully charging NB-CP2LI takes about 4 hours (at normal temperatures), after which
[
] is no longer displayed.
SELPHY can also be turned on (
charging stops. When SELPHY is turned off, [
resumes.
Caution
Keep SELPHY horizontal during charging. Charging may take longer if SELPHY is
upright during charging.
Note
For battery precautions, refer to the battery user manual.
When [
] is displayed, before charging, make sure SELPHY is in an
environment at within the operating temperature range (
ambient temperature.
Response when [
• Unplug SELPHY, remove the battery, wait a while, and then charge it in a
horizontal position.
• If [
] appears while SELPHY is horizontal, the battery may have reached
the end of its useful life. Purchase a new battery pack.
[
] display can be cleared by holding down a button other than <
least 3 seconds. [
other than <
> while the screen is off and the battery is charging.
] blinks on the screen.
) and used while [
] is displayed
] is displayed for about 10 seconds if you press a button
113
] is blinking. However,
] starts blinking again and charging
) and has adjusted to the
> for at
Hide quick links:
Advertisement
Table of Contents
