Page 1
– INSTRUCTION MANUAL – TAMOTO BED DESIGN BY SHANE SCHNECK...
Page 3
– PARTS – Screw Screw Screw Allen key Glider Slats** Middle stretcher* Textile cover Middle leg* Foot Stretcher Headboard *Not for all sizes **Sold separately in some markets...
Page 4
Connect the stretchers to the foot of the frame using the screws and the Allen key . Mount all the screws loosely before tightening them completely. Then press the gliders onto the legs.
Page 5
Connect the frame to the headboard using the screws and the Allen key Mount all the screws loosely before tightening them completely. Then press the gliders onto the legs.
Page 6
Connect the frame to the headboard using the screws and the Allen key Mount all the screws loosely before tightening them completely.
Page 7
Remove the textile covering the velcro on all four stripes. Drape the textile cover over the headboard. Make sure the HAY label is on the backside of the headboard.
Page 8
Pull the cover down on both sides. Then zip the zipper and press the velcro together, both at the sides and on the bottom.
Page 9
Press the glider onto the middle leg . Mount the middle stretcher with the middle leg underneath. Secure it with the screws using the Allen key Mount all the screws loosely before tightening them completely. NOTICE The middle leg and the middle stretcher are not included...
Page 10
Mount the slats* using the screws with the Allen key Mount all the screws loosely before tightening them completely. *Sold separately in some markets...
– CARE & MAINTENANCE – The textile cover is dry clean only. Pull out the reinforcements from each corner before cleaning.
Page 13
– CARE & MAINTENANCE – Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture. Please find our Care & Maintenance...
Need help?
Do you have a question about the TAMOTO BED and is the answer not in the manual?
Questions and answers