CARE AND MAINTENANCE With a little care you can prolong the life of your appearance of the Traverse furniture and furniture. Follow the instructions for the materials make it easier to clean. of your specific product to make sure that it stays •...
Page 4
CARE AND MAINTENANCE in a ventilated area to dry, preventing the residual moisture from affecting the lifetime and getting mouldy. Wipe with a clean cloth wrung in water or in a solution of water and a neutral detergent. Remove soap residue immediately using a clean, dry cloth. Avoid using scouring cream or scouring pads, as they may scratch the surface.
Page 6
PARTS Slat with pin holes x3 Slat x9 Washer x24 Allen key x1 Screw x24 Arm x2 Screw x4...
Page 7
WARNING Protect the table from scratches and other damage while assembling by using the cardboard packaging as underlay.
Page 8
Washer Screws Avoid moving the legs, Do not fully tighten until the product is fully the screws assembled.
Page 11
Make sure that all the screws are loosely tightened and the legs are stable on the ground before continuing to the next step.
Page 12
Do not overtighten the screws as this can damage the product.
Page 13
Apply an even and steady pressure on the center of the slats when tightening the screws.
Page 14
Apply an even and steady pressure on the center of the slats when tightening the screws. Do not overtighten the screws as this can damage the product.
Page 21
CARE AND MAINTENANCE Our Care & Maintenance offers guidance for optimal maintenance of your HAY product. It includes advice and instructions on cleaning and caring for specific materials to prolong the life of your furniture. Please find our Care & Maintenance guide by scanning the QR code You can find more relevant information on Traverse...
Need help?
Do you have a question about the TRAVERSE Chair and is the answer not in the manual?
Questions and answers