Mechanical Specifications; Heat Dissipation - StepperOnline CL86T User Manual

2.3 Mechanical Specifications

(unit: mm [1inch=25.4mm])

2.4 Heat Dissipation

CL86T(V4.0) reliable working temperature should be no more than 40℃ (109°F)

It is recommended to mount the drive vertically to maximize heat dissipation. Mount a cooling fan nearby

if necessary.
If multiple CL86T (V4.0) drives are installed, it is suggested to keep a minimal 30mm (12 inches)

between two of them.
Figure 1: Mechanical specifications
2
CL86T(V4.0) Closed Loop Stepper Drive User Manual