Page 3
Raycus pulsed fiber laser is classified as a high power Class IV laser device. Before supplying the power to the device, please make sure that the correct voltage of 24 VDC power source is connected and the anode and cathode are right.
Caution: Make sure the corresponding wires of the device are properly grounded. b) All the maintenance to the device should only be done by Raycus, because there is no replacement or accessory provided with the device. Please do not try to damage the labels or open the cover in order to prevent against electric shock, or the warranty will be invalid.
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P100QA Pulsed Fiber Laser User’s Guide V2.1 if laser is mounted in a cabinet with fans, the direction should be same as laser’s fans. g) Do not look into the output head of the device directly. Please do wear appropriate laser safety eyewear during the time when operating the device.
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P100QA Pulsed Fiber Laser User’s Guide V2.1 24V- 24V+ Figure 3 Definition of power line wires c) Make sure that the interface of the external controller matches the laser and the control cable is well connected to the laser’s interface.
Page 10
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P100QA Pulsed Fiber Laser User’s Guide V2.1 Figure 5 Connect port of controller Table 3 Definition of connect ports of controller PIN No. Name Description 8 bit Parallel port; D0 is minimum bit and D7 is maximum bit;...
Wuhan Raycus Fiber Laser Technologies CO., Ltd. RFL-P100QA Pulsed Fiber Laser User’s Guide V2.1 PIN 5 PIN 6 PIN 7 PIN 8 Current ~50 % ~75 % ~87.5 % ~93.75 % 100% b) PIN 17 is the external 5 V input, providing power supply for alarm signal: input current >20 c) Those external input signals (PIN 1-8, 18-20, 22) are connected to the optical coupler inside the system.
Raycus has the right to choose to repair or replace any product that proves to be defective in materials and workmanship selectively during the warranty period. Only products with particular defects are under warranty.
5.3 Service and repairs Raycus is responsible for all the maintenance, for there is no accessory available inside for users to use. Please contact Raycus as soon as possible when problems under warranty about maintenance happen to the product.