Hot Water For Use; Chimney Connection; Radiator Installation Connection - Teba therm T-25 Installation And Manual

Central heating stove with solid fuel

Hide thumbs Also See for T-25:

Table of Contents

4.2.5 Hot water for USE

There is a serpentine(flex pipe) system for hot water. In the serpentine system,

pressure reducers, valves or spiral hose must be used for hot-cold inlet-outlet. In

addition, if there is any problem in the product by connecting the serpentine

system heat safety valve (power failure, etc.), and the boiler water temperature

rises to 95 ºC, it opens the way of the heat exchanger to allow the cold water to

circulate in the boiler and helps to reduce the heat of the boiler water and prevent

it from going out again.

For stove connection steel sheet flue pipes of 2mm thickness must be used. Stove

pipe must be connected to stove chimney output and chimney firmly. This strong

and close connection is also compulsory for flue pipes. After connecting flue pipe to

the chimney, remaining gaps around chimney must be closed with sealing and

fireproof materials. When the distance between stove and chimney is long,

horizontal connection must be avoided. Chimney pipe must be installed according

to the direction of the chimney. When the distance is short at least 1meter length

flue pipe must be used and must be installed vertically.

The chimney to be used at the exhaust gas outlet can be multiple chimney

connection (See Chimney Assembly Diagram)

CAUTION: Do not burn the stove when the flue pipe is connected. First of all,

the radiator installation must be done ( Otherwise stove burned without

water can lead to stove deformations). Our company is not responsible for

damages caused by burning without water.

The chimney connection should be done according to DIN4705.

Stove radiator plumbing connections should be installed by an expert or qualified

person to guarantee a technically correct operation. Our company is not

responsible for any mistakes that will occur while installing and assembling.

The radiator wiring connection of the stove should only be made with quality and

tried-and-tested safety equipment.

Plumbing main line pipes, for metal and plastic PVC Pipes should be at least 1''. In a

heating system installed like this, the circulation ( hot water circulation ) will be

easy, comfortable and the temperature of radiators is felt earlier. The main line

pipes of the last few radiators can be ¾" metal and a plastic PVC pipe.

Table of Contents