Table of Contents
Advertisement
The surface of the stove should not be cleaned with scratching and harmful
cleaning material because otherwise the paint surface may be damaged.
6.1 PROBLEM AND CAUSES
Reasons why the stove does not
heat or smoke coming out
The stove or the stove-pipe let
smokes continuously
The chimney connection of the
stove is leaking
The boiler does not reach the
desired temperature
The desired temperature is not
reached while the boiler is burning
There is no fresh air flow from
outside
The water pressure and level in the
system is too low
The stove is overheating
continuously
The mechanical thermostat is not
set correctly
Solution
Check the chimney efficiency. Clean
your stove and stove pipes on time ( see
the chimney assembly scheme )
Check the connection. In case of
necessity close the leaking areas with
sealing materials (see chimney
assembly scheme )
- Check Fuel Type
- Chimney emission may be low
- Check the combustion chamber
for sufficient air supply
- Check the height of the expansion
tank
- Check plumbing
- Heat losses are prevented
- In case of necessity isolation
should be done
Ventilate the room more
Check the water pressure ( add water if
necessary )
Check the power and whether the pump
is switched on, use the power supply
Set the mechanical thermostat at the
desired temperature
13
Advertisement
Table of Contents
