Ashtray Discharge; Emission Limit; Cleaning And Maintenance - Teba therm T-25 Installation And Manual

Central heating stove with solid fuel

Hide thumbs Also See for T-25:

Table of Contents

5.3.3 Ashtray Discharge

After a long period of combustion, at least once a day, the ash should be

transferred from the grid to the ash tray by using the ash-handle. We advise you to

do this when the stove is cold. When half of the ashtray is filled, draining should be

considered.

If the ashtray is full, cast-iron parts will stay between the fuel chamber and ash,

and the air-take will be impossible. This can cause damage and deformations to the

product parts. While emptying the ash, make sure the cover of the chamber is

closed.

Attention! Before discharging the ash, embers should be checked. Even if the

ash is cold, there may still be embers in the trash that can cause a fire.

The stove is suitable for high efficient fuel. Unsuitable fuels according to the

Ministry of Environment Applications are for example:

• Wood that is moist and treated with protection

• Thin sawdust

• Paper and paperboard (except ignition)

• Bark and hardboard waste

• Plastic and other wastes

Burning these materials will damage the environment as well as shorten the life

of the stove and cause damages. Regular cleaning and maintenance will also

reduce harmful emissions.

At least once a year (when necessary more often) the stove should be cleaned and

maintained in cold condition (once every 2 months when using coal). The

efficiency increases as much as you clean. Wastes adhering to the stove and the

stove pipe should be cleaned with a brush. Fireplace glass can be cleaned with a

wet sponge and ordinary glass cleaning material can be used or the flame itself can

clean the glass in efficient chimneys. Besides, the chimney should be cleaned once a

year. We advise you to get the cleaning done by an authorized person.

Table of Contents