Introduction - Teba therm T-25 Installation And Manual

1. INTRODUCTION

Central heating stoves provide a comfortable and easy-to-use interior aqueous
system. These heating units combine pleasure with a fireplace view. It is an
independent heating unit that provides heat dissipation of radiators, heat
distribution to the whole house and hot water through heat exchanger or boiler.
The stove body is made of steel and the food heating chamber is made of Teflon or
enamel coating.
The ashtray is placed at the bottom of the product and a fire chamber is available.
Water chamber is located on three sides (right, left and rear) of the combustion
and heating area.
Chimney output is placed on the upper plate of the product.
The product is highly efficient due to its physical structure.
It has an automatic ash discharge system.
There is an easy replaceable grid system.
The thermostat in the product ensures that the circulation pump prevents
automatically, thus avoids the continuous consumption of the electricity.
Circulation pump works quietly and the electricity consumption is up to a light
bulb.
Once the air flow is set, the system automatically starts getting fresh air through
the mechanical thermostat. Thus, fuel savings can be ensured by using the product
in the desired degree.
You have a solid fuel central heating stove with European Standards Quality
Certificate.
Please read the user manual, carefully. It includes information on product
functions and easy-to-use information.
Use of these information increases the product quality and extend its life. You can
properly protect the fuel and the environment.
Warranty of the product depends on the right use of installation and instructions
as described in the guide.
We recommend you to keep this guide in order to reach the information about the
correct use of the stove at the beginning of every winter.
3