Indicator Panel; Hot Water For Use - Teba therm T-17 Installation Manual

3 - 4 Parts
Wood (Around. 3,5 - 4
kg)
Coal (Around 3,5 - 4
Briquettes kg)
The mechanical thermostat should be set to the highest degree (90ºC) when the
stove is burning.The chain connected to the mechanical thermostat and the vent
cover ensures wide opening of the vent cover. After about 15-20 min – the stove
becomes hot enough - you can set the Mechanical Thermostat to the required
temperature, it should not be under 40ºC; otherwise it will not cause rapid
combustion.

4.2.4 Indicator Panel

Electric Lamp: The electric lamp starts to last the moment we plug the stove into the
wall socket. If this lamp illuminates, it indicates that there is electricity. If the lamp
does not illuminate, check the power line.
Pump: the pump lamp indicates whether the circulation pump is activated.
Thermometer: the thermometer allows us to see the temperature of the water
inside the stove.
Boiler Thermostat: the boiler thermostat enables the circulation pump to operate at
a certain temperature. This temperature is between 35ºC and 45ºC.
CAUTION: Our electrical system operates at 220V / 50Hz. Our company is not
responsible for any voltage drop and/or rise of the electrical current.

4.2.5 Hot water for USE

There is a serpentine(flex pipe) system for hot water. In the serpentine system,
pressure reducers, valves or spiral hose must be used for hot-cold inlet-outlet. In
addition, if there is any problem in the product by connecting the serpentine system
First of all, burn 10 -15 min
at least at max.
Temperature (90Cº)
After set to the temperature
you need.
First of all, burn 15-20 min
at least at max.
Temperature (90Cº)
After set the temperature
you need.
8
Open
Open