3.9 PCI Expansion Cards
The system accepts up to six PCIe expansion cards.
Item
Description
1
PCIe 4.0x8 low-profile slot (Occupied by JBOD expansion slot, AOM-SAS3-818E)
2
3
PCIe 4.0x16 low-profile slot (Slot 2 occupied by SAS controller)
–
4
5
PCIe 4.0x16 low-profile slot
–
6
PCIe 4.0x8 low-profile slot
Note: PCIe slot 1/2 is occupied by the JBOD Expansion/Storage Controller.
Installing an Expansion Card
1. Power down the system as described in
in
section
3.2.
2. Unscrew and remove the chassis slot cover.
3. Insert the expansion card into a slot on the motherboard while aligning the expansion
card backplate with the open slot in the rear of the chassis. Secure with a screw.
4. Replace the cover and power.
Chapter 3: Maintenance and Component Installation
Figure 3-10. Expansion Slots
Expansion Card Chassis Slots
section 3.1
54
6
5
4
3
and remove the cover as described
2
1