Supermicro SuperServer SSG-640P-E1CR36H User Manual page 19

SLOT6
S-SGPIO
USB0/1 (2.0)
USB2/3, USB7/8 (3.0)
USB4/5 (3.0)
USB6
UID LED/BMC Reset (JUIDB1)
VGA (JFP2)
VGA (JVGA)
VROC (JRK1)
Note: For details on how to configure Network Interface Card (NIC) settings, please refer to
the Network Interface Card Configuration User's Guide posted on our website under the link:
http://www.supermicro.com/support/manuals/.
Note: For detailed instructions on how to configure VROC RAID settings, please refer
to the VROC RAID Configuration User's Guide posted on the web page under the link:
http:// www. supermicro.com/support/manuals/.
PCIe 4.0 x8 slot supported by CPU2
Serial link general purpose I/O connection header (for S-SATA4/5 SuperDOM support)
Front-accessible USB header with support for two USB 2.0 ports
Rear I/O USB 3.0 ports
Front-accessible USB header with support for two USB 3.0 ports
Internal Type A USB 3.0 port
Unit Identifier (UID) LED and BMC reset switch
Front VGA header
Rear VGA port on the I/O back panel
Intel VROC key header for NVMe RAID support (see Note below.)
19
Chapter 1: Introduction