Related Manuals for Philips AJ 3600 AJ 3600
Summary of Contents for Philips AJ 3600 AJ 3600
- Page 1 Clock Radio Register your product and get support at www.philips.com/welcome User manual Mode d’emploi Manual del usuario Benutzerhandbuch Gebruiksaanwijzing Manuale utente AJ 3600...
- Page 4 RADIO PRESET SLEEP RADIO PRESET...
- Page 5 Congratulations on your purchase, and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. SUPPLIED ACCESSORIES – 1 X AC 7.5V adapter TOP AND FRONT PANEL (See 1) 1 RADIO ON/OFF –...
-
Page 6: Power Supply
POWER SUPPLY Batteries (not included) 1 Open battery door and insert four batteries (preferably PHILIPS POWER LIFE o alkaline), type R6, UM3 or AA as indicated in the compartment. 2 Remove the batteries from the set if they are exhausted or not be used for a long time. -
Page 7: Basic Features
The self-powered back-up conveniently allows your preset stations, alarm and clock time settings to be stored for up to 3 minutes when there is a power interruption e.g. AC power failure or when changing batteries.The complete clock radio and backlight illumination will be switched off. -
Page 8: Brightness Control
➟ ➟ Bright Helpful hints: – When battery-powered, the display illumination is default low to help save ener- gy. Any other use of the will therefore be effectively limited. SETTING THE CLOCK The time is displayed using the 24-hour clock. 1. -
Page 9: Using The Alarm
For FM, extend and position the pigtail fully to obtain optimum reception. For MW, the set is provided with a built-in aerial. Direct the aerial by adjusting the position of your clock radio. STORING AND USING PRESET STATIONS You can store up to a total of 10 radio stations in the memory, 5 on each wave- band. -
Page 10: Switching Off The Alarm
5. After both the hours and minutes are set, press SET ALARM 1 or SET ALARM 2 to confirm the setting. Helpful hints: – If you have selected AL 1 (AL station before turning off the set. – If you set and activate the same time for both alarms, only the AL 2 (AL be activate at the set time. - Page 11 SLEEP (See 6) About Sleep This set has a built-in sleep timer, which enables the radio to be automatically switched off after a set period of time. There are four sleep time options. Setting and switching off SLEEP 1 Within 1 second, press ALARM RESET / SLEEP twice until the display shows SLEEP and SL: 60.
-
Page 12: Maintenance And Safety
Helpful hints: – When battery-powered, the projection lens lights up briefly to help save energy. – For a longer projection time, please use the supplied 7.5V AC adapter to operate the set. MAINTENANCE & SAFETY • If you do not intend to use set for a long time, remove the batteries. •... -
Page 13: Troubleshooting
Continuous crackling and hiss noise during MW reception – Interference from other electrical equipment e.g. TVs, computers, fluorescent lamps • Move the clock radio away from electrical equipment Intermittent crackling sound during FM reception – Weak signal • Extend and position the pigtail aerial... - Page 14 The alarm does not function – Alarm time/ mode not set • See SETTING THE ALARM – Volume too low for radio • Increase the volume – AL 1 (AL ) not tuned to a radio station • Check if the set is tuned to a radio station before you set AL1 and when you switch off the radio.
-
Page 15: Environmental Information
ENVIRONMENTAL INFORMATION We have reduced packaging to the minimum for easy separation into two materials: paper and cardboard. Your set consists of materials which can be recycled if disassembled by a specia ized company. Please observe local regulations on the disposal of packing materi als and old equipment. - Page 16 Clock radio Meet Philips at the Internet http://www.philips.com English Français Español Deutsch Nederlands Italiano Printed in China AJ3600_12_UM_V2.0...