Table of Contents
Advertisement
5 Listen to radio
Note
•
Only FM radio reception is available on this unit.
Tune to a radio station
Tip
•
For the optimal reception, fully extend and adjust the
position of the FM antenna.
•
Position the antenna as far as possible from your
household appliances or other radiation sources.
•
[STEREO] is the default setting for tuner mode.
•
In tuner mode, you can press and hold
to switch between [STEREO] and [MONO], and the
unit memorizes your setting even if you turn off the
unit or switch to other sources.
1
Press
/SOURCE repeatedly to select FM
mode.
2
Press and hold
for more than 2 seconds.
» The radio tunes to the next station
with strong reception automatically.
3
Repeat step 2 to tune to more stations.
• To tune to a weak station, press
(TUNE+/TUNE-) repeatedly until you
find the optimal reception.
Program radio stations
Radio station presetting allows you to save
radio stations, and quickly tune to a favorite
station.
Note
•
The preset list can store up to 20 stations.
•
If the preset list is fully occupied, the screen will show
P 20.
•
When you save a radio station to a position that has
already been occupied, the original radio station will
be replaced.
/SET TIME
/
(TUNE+/TUNE-)
/
Program radio stations manually
1
Press
/SOURCE repeatedly to enter FM
mode.
2
Press
/
(TUNE+/TUNE-) to tune to a
radio station.
3
Press
/PROG/SCAN.
» A preset number flashes.
4
(PRESET +/PRESET -) to
Press
/
change the preset number.
5
Press OK/
DOCK 2 to save the
current radio station to the selected preset
number.
Program radio stations automatically
1
Press
/SOURCE repeatedly to enter M
mode.
2
Press and hold
» The screen displays [AUTO] (auto).
» The unit starts to scan for all available
radio stations automatically, and saves
them to the preset list.
3
Wait until the auto scan finishes.
» The first station in the preset list
broadcasts automatically.
Select a preset radio station
(PRESET +/PRESET -) to
•
Press
/
select a preset number.
/PROG/SCAN.
EN
11
Advertisement
Table of Contents
