Manual Organization - Oceaneering C-Nav3050 Manual

How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.

Manual Organization

This is a comprehensive guide to the steps necessary to connect the
C-Nav3050 receiver to the C-NaviGator III. The guide is split into sections that
show a step-by-step guide to establishing the connections via Serial, USB or
Ethernet.
Section 1 – Overview
(Page 7) provides a brief overview of this document, along
with a section for installing the programs required.
Section 2 - Serial Connection (Page 8) Details how to connect the receiver to
control display unit via the serial connection.
Section 3 - USB Connection (Page 13) Details how to connect the receiver to
control display unit via the serial connection.
Section 4 - Ethernet Connections (Page 21) Details how to connect the receiver
to control display unit via the serial connection. This section is split into Direct
and Non direct connections.
Section 5 - Bluetooth connection (Page 33) Details how to connect the receiver
to control display unit via the Bluetooth connection.
Revision 3 Page 5 of 42 5/5/2017