Table of Contents
Advertisement
How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
Please note:
If an entry in the Ports (COM & LPT) already shows C-NAV3050® GNSS
Receiver then skip to Page
1. Right click the SOLARIS VIRTUAL COM that has appeared in the Device
Manager and select Update Driver Software.
2. Next select Browse my computer for driver software.
3. Specify the location of the "C-Nav3050®_USB.inf" file by clicking
Browse..., selecting it from the appropriate directory, then click Next.
Revision 3
17
of this manual for further procedures.
Page 15 of 42
5/5/2017
Advertisement
Table of Contents
Need help?
Do you have a question about the C-Nav3050 and is the answer not in the manual?