Oceaneering C-Nav3050 Manual page 11

How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
7. If it is not the first time connecting, please select Show/Hide Advanced
Settings and ensure the default settings as per the screen shot below are
entered in for the Speed, Data Bits, Parity, and Stop Bits. Press Open.
The user should now witness a Device Window full of information similar
to the image on the next page.
8. If all settings are according to the defaults and a successful connection is
not established, try changing Auto-Detect Settings to Yes. Now press
Open. This will cycle through the possible combinations of connections
settings to determine if the receiver was previously connected on different
settings.
Revision 3 Page 11 of 42 5/5/2017