Oceaneering C-Nav3050 Manual page 25

How to Connect a C-Nav3050 to C-Setup /
C-Monitor / C-Scape.
9. Enter the IP address for the PC. In this case, enter
devices to establish a connection they need to have the first three segments of
numbers in the IP address to be the same.
10. Press the Tab button on the keyboard. The Subnet mask is automatically
populated.
OK
11. Click the
dialog box.
Now connect the Positronic 9-Pin connector of the Ethernet cable (P/N 94-
310265-3006LF) to COM1 – LAN of the C-Nav3050®. Connect the RJ45 plug
end to an available Ethernet port on the PC.
Revision 3
button on this dialog box and also on the Local Area Connection
Page 25 of 42
192.168.0.001
. For the two
5/5/2017