Dts Logic 7; Dt Logic; Dts Film - JBL SDP-3 Installation & Technical Manual

DTS Effects and Parameters

DTS Logic 7

DTS Film

56
DTS Logic 7 combines all the features of DTS Digital with enhance-
ments by JBL Synthesis and LucasFilm. This effect uses Logic 7 matrix
technology to enhance the steering between the side speakers and the
rear speakers, so sounds intended to come from behind the listener
actually do come from behind. This effect also includes the adaptive
decorrelation and re-equalizer features of DTS/THX.
DTS Logic 7 provides the ultimate in film reproduction. It brings out all
the increased excitement and spaciousness a 7 channel speaker
system can produce.
Parameter
VOCAL ENHANCE
RE-EQUALIZER
BASS ENHANCE
REAR DELAY OFFSET
SIDE LEVEL
REAR LEVEL
LFE MIX LEVEL
SUBWOOFER LVL
CUSTOM/TRIGGER
The DTS Film effect decodes DTS-encoded soundtracks. It uses five
discrete full-range channels and a sixth dedicated, Low Frequency
Effect (LFE) channel. In this effect, any rear speakers present are
connected in parallel with the side speakers. This is the basic DTS
effect. It does not include the enhancements by JBL Synthesis or
LucasFilm, which are available with other DTS effects in the SDP-3.
Parameter
VOCAL ENHANCE
RE-EQUALIZER
BASS ENHANCE
SIDE LEVEL
REAR LEVEL
LFE MIX LEVEL
SUBWOOFER LVL
CUSTOM/TRIGGER
Initial Value
+0.0dB +0.0dB, +3.0dB, +6.0dB
OFF
OFF
15ms
+0dB -5dB to +5dB
+0dB -5dB to +5dB
-5.0dB -20.0db to0.0dB
-5dB -10dB to +10dB
ENABLE ENABLE, DISABLE
Initial Value
+0.0dB +0.0dB, +3.0dB, +6.0dB
ON
OFF
+0dB -5dB to +5dB
+0dB -5dB to +5dB
-5.0dB -20.0db to +0.0dB
-5dB -10dB to +10dB
ENABLE ENABLE, DISABLE
JBL Synthesis
Range
ON, OFF
ON, OFF
0-20ms
Range
ON, OFF
ON, OFF