Table of Contents
Advertisement
System
Configuration
OFF
OSD (ON)
VOL
Mute
SELECT and DONE (remote control only)
VCR, DVD, V Disc, TV, AUX, CD, Tuner, and Tape
Dolby, THX, Logic 7, and DTS (remote control only)
2 CH, Party, TV M, and Music (remote control only)
22
LED and redirects the current main zone input to the Record/Zone 2
outputs.
Turns off the Zone 2 outputs, and the associated front panel LEDs.
Displays a STATUS menu for the current input. Press Done to exit.
and
Displays, then adjusts the current Zone 2 volume level. Activated
displays (FP or OSD) will show level and a bar gauge. When Zone 2
mute is engaged, these controls adjust volume without disengaging
Zone 2 mute.
Engages Zone 2 mute and reduces the Zone 2 volume level to -80dB.
Pressing again restores Zone 2 volume to its previous level.
Displays, then adjusts Zone 2 left/right balance. Activated displays (FP
or OSD) will show bar gauge and level in dB.
Selects the Record/Zone 2 input and lights the corresponding front
panel input LED (unless the input is blocked).
These controls set the Zone 2 volume level to the following levels.
These controls set the master volume level to the following levels. When
Zone 2 mute is engaged, these controls set the Zone 2 volume level
without disengaging mute.
Dolby -30dB
THX
-20dB
Logic 7 -10dB
DTS
+00dB
2CH
-30dB
Party
-20dB
TV M
-10dB
Music +00dB
JBL Synthesis
Hide quick links:
Advertisement
Table of Contents
