Table of Contents
Advertisement
System
Configuration
Customization
Locking Settings
LOCK SETTINGS MENU
SETTINGS
UNLOCKED
CUSTOM NAME
ASSIGN CUSTOM NAME
Assign Custom Name
32
After you have calibrated and customized the SDP-3, there are two
additional steps recommended to safeguard the settings. First, docu-
ment your adjustments using the worksheet at the end of this manual.
Second, consider locking the settings so that they cannot be inadvert-
ently changed. The last item in the Setup menu allows you to lock the
SDP-3 settings, as well as to change the name displayed during power up.
Locking the settings allows full operation of the unit but prohibits the
ability to change effect parameters or setup values. Specifically, with the
settings locked, the unit will allow any Parameter or Setup menu to be
displayed, but attempting to select any item for adjustment will display
the message: SETTINGS ARE LOCKED.
OFF
In order to prevent accidental changes, select the SETTINGS param-
eter and use
achieved by simultaneously pressing Record/Zone 2 on the remote,
then pressing FX
When the SDP-3 is first turned on, it displays a copyright notice with the
current software version. You can choose to have it display CUSTOM-
IZED FOR DEMONSTRATION with the word DEMONSTRATION
scrolled in from right to left, or you can replace the word DEMONSTRA-
TION with a custom name of as many as 20 characters. To assign a new
name, use
press s to turn this function ON, then press DONE.
You will return to the Lock Settings menu with ASSIGN CUSTOM NAME
highlighted. Pressing SELECT will display the current name with a
cursor indicating which character position can be modified. Use
to select a new character. Use SELECT to move the cursor to a new
position. Press DONE to save the new name.
to select LOCKED. A higher level of security can be
(with SETTINGS selected). Repeat to release lock.
and
to highlight CUSTOM NAME. Press SELECT and
JBL Synthesis
and
Hide quick links:
Advertisement
Table of Contents
