Home Connect; Connecting The Appliance To A Wlan Home Network (Wi-Fi) With Wps Function - Bosch GI81NH Series User Manual

en Home Connect
Switching off the temperature
alarm
Press .
▶
a The warning tone is switched off.
a From this time on, the warmest
temperature is measured again
and saved.
lights up until the set temper-
a
ature is reached again.
Home Connect
10 Home Connect
This appliance is network-capable.
Home Connect
Connect your appliance to a mobile
device to control its functions via the
Home Connect app.
The Home Connect services are not
available in every country. The avail-
ability of the Home Connect function
depends on the availability of
Home Connect services in your coun-
try. You can find information about
this at: www.home-connect.com.
To be able to use Home Connect,
you must first set up the connection
to the WLAN home network (Wi-Fi
and to the Home Connect app.
After switching on the appliance, wait
at least 2 minutes until internal
device initialisation is complete. Only
then should you set up Home Con-
nect.
¡ Connecting appliance to WLAN
home network (Wi-Fi) with WPS
function → Page 34
¡ Connecting appliance to WLAN
home network (Wi-Fi) without WPS
function → Page 35
The Home Connect app guides you
through the entire login process. Fol-
low the instructions in the Home Con-
nect app to configure the settings.
1
Wi-Fi is a registered trademark of the Wi-Fi Alliance.
34
Tips
¡ Please consult the documents sup-
plied by Home Connect.
¡ Please also follow the instructions
in the Home Connect app.
Notes
¡ Please note the safety precautions
in this instruction manual and
make sure that they are also ob-
served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 24
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Connecting the appli-
ance to a WLAN home
network (Wi-Fi) with
WPS function
If your router has a WPS function,
you can connect the appliance to
your WLAN home network (Wi-Fi)
1
)
automatically.
Press
1.
a The temperature display shows
Press
2.
temperature display shows
Press .
3.
a The temperature display shows an
animation for two minutes. The ap-
pliance is ready for automatic con-
nection to the WLAN home net-
work (WiFi).
Activate the WPS function on the
4.
router during this period.
To do this, take note of the inform-
ation in the documents for your
router.
a Once successfully connected,
flashes in the temperature display.
.
repeatedly until the
.
.