Home Connect; Setting Up Home Connect; Activating The Cameras; Disabling The Cameras - Bosch KGN86 Series Information For Use

served when operating the appli-
ance via the Home Connect app.
→ "Safety", Page 9
¡ Operating the appliance on the ap-
pliance itself always takes priority.
During this time it is not possible
to operate the appliance using the
Home Connect app.
10.1 Setting up Home Con-
nect
Requirement: The Home Con-
nect app has been installed on your
mobile device.
Scan the QR code using the
1.
Home Connect app.
Follow the instructions in the
2.
Home Connect app.
10.2 Activating the cameras
Requirement: The appliance is con-
nected to the Wi-Fi home network
and the Home Connect app.
Press +
1.
same time.
a The temperature display (refriger-
ator compartment) shows
Press repeatedly until the tem-
2.
perature display (refrigerator com-
partment) shows "Camera menu
active" and the temperature dis-
play (freezer compartment)
shows .
Press
3.
a The temperature display (refriger-
ator compartment) shows . The
cameras are activated.
10.3 Disabling the cameras
Press
1.
same time.
a The temperature display (refriger-
ator compartment) shows
Press
2.
perature display (refrigerator com-
partment) shows and the temperat-
ure display (freezer compartment)
shows .
Press
3.
a The temperature display (refriger-
ator compartment) shows . The
cameras are disabled.
10.4 Installing updates for the
The appliance searches for updates
to the Home Connect software at reg-
ular intervals.
Note: If updates are available, the
temperature display (refrigerator
compartment) shows
To reset the update and the temper-
ature display (refrigerator compart-
ment) to the set temperature, press
any touch field.
at the
Press
1.
same time.
a The temperature display (refriger-
.
ator compartment) shows
Press
2.
perature display (refrigerator com-
partment) shows
perature display (freezer compart-
ment) shows
Press
3.
a The temperature display (freezer
compartment) shows an animation.
Home Connect en
.
+
repeatedly until the tem-
.
Home Connect software
+
repeatedly until the tem-
.
.
at the
.
.
at the
.
and the tem-
25