Table of Contents
Advertisement
Kendrion Kuhnke Automation GmbH
Hazard and Other Warnings
Despite the actions described hereunder, the occurrence of faults or errors in electronic control units - even if
most highly improbable - must be taken into consideration.
Please pay particular attention to the additional notices which we have marked by symbols throughout this
instruction manual. While some of these notices make you aware of possible dangers, others are intended
as a means of orientation. They are described further down below in descending order of importance.
Every alert and hazard warning is made up as follows:
Type and source of risk
Potential consequences of non-observance
Preventive measures
DANGER
A DANGER warning makes you aware of an immediately hazardous situation which WILL
cause a serious or fatal accident if not observed.
WARNING
A WARNING makes you aware of a potentially hazardous situation which MAY cause a
serious or fatal accident or damage to this or other devices if not observed.
CAUTION
A CAUTION alert makes you aware of a potentially hazardous situation which MAY cause
an accident or damage to this or other devices if not observed.
NOTE
A NOTE makes you aware of a potentially hazardous situation which MAY cause damage
to this or other devices if not observed.
Other Notices
Information
This symbol draws your attention to additional information concerning the use of the
described product. This may include cross references to information found elsewhere
(e.g. in other manuals).
Electrical Safety
Our products normally become part of larger systems or installations. The information below is intended to
help you integrate the product into its environment without dangers to humans or material/equipment.
DANGER
Non-observance of the instruction manual
Measures for the prevention of dangerous faults or errors may be rendered ineffective or new
hazard sources created.
Thoroughly read the instruction manual
Vico MT (E 863 GB)
01/10/2021
Reliability, Safety
8
Advertisement
Table of Contents
