Kendrion Kuhnke Automation GmbH
Ethernet "NET1" (X5)
The on-board 1000 Mbit base-T Ethernet adapter attaches the unit to a gigabit Ethernet network through its
RJ-45 connector.
It automatically detects and adapts the interface to 10BaseT or 100BaseT Ethernet networks.
The LEDs labelled "LNK" and "RCV" tell you whether the unit is properly connected to the network.
Cable: shorter than 30 m, shielded, min. Cat-5e
Pin wiring:
NET1
X5
Ethernet "NET2" (X6)
The on-board 10/100 Mbit base-T Ethernet adapter attaches the unit to a network through its RJ-45
connector. The LEDs labelled "LNK" and "RCV" tell you whether the unit is properly connected to the
network.
Cable: shorter than 3 m, shielded, min. Cat-5e
Pin wiring:
NET2
X6
NOTE
Unauthorised access to the computer
Controller failure and data loss
Integration in networks granting public access requires the user to take appropriate
measures aimed at preventing unauthorised access.
Vico MT (E 863 GB)
01/10/2021
X5
NET1
Connector
Pin
RJ45
LED "LNK"
green / orange
LED "RCV"
orange
X6
NET2
Connector
RJ45
LED "LNK"
green / orange
LED "RCV"
orange
Construction and Functionality
Function
S
Shield
1
D1+
2
D1-
3
D2+
4
D3+
5
D3-
6
D2-
7
D4+
8
D4-
Pin
1
2
3
4
5
6
7
8
Shield
TX+
TX-
RX+
RX-
data link
activity
Function
TX+
TX-
RX+
75 Ohm
75 Ohm
RX-
75 Ohm
75 Ohm
data link
activity
24