Table of Contents
Advertisement
Kendrion Kuhnke Automation GmbH
2.2 Application
Intended Use
The panel is designed for on-site use in industrial environments immediately at the machine. It installs in
switching cabinets, switching or control panels.
This series provides devices and equipment manufacturing with a visualisation unit for different applications:
Place of installation
If installed in an enclosed space, the unit's front is protected against dust and water. Ingress protection at the
back is IP 20 where it should be protected against humidity and dirt separately.
Waste heat develops in the rear part of the unit. Verify that the place of installation is ventilated properly.
NOTE
Damage to the unit
Choosing the wrong place of installation may cause damage to the unit.
Check section Technical Data for the admissible ambient conditions and the unit's
mounting position.
Foreseeable Misuse
Do not use in explosive atmospheres!
DANGER
Do not use in explosive atmospheres!
Using the unit in explosive atmospheres may cause death or serious personal or property
damage.
The unit is neither designed nor approved for use in explosive atmospheres.
Do not use in domestic areas!
WARNING
This unit is solely designed for use in industrial environments and may provoke radio
interference at home. Take the appropriate precautions before using it at home.
Design constraints for high-risk use cases
The product is neither designed nor intended for use in customer systems or together with third-party
materials which have been shown to potentially cause fatal or serious personal injury or material or
environmental damage if the product fails or produces a fault ("High Risk Use ").
High-risk use applications are strictly prohibited.
DANGER
Danger caused by malfunctions
Fatality, serious personal injury or serious material or environmental damage
High-risk use applications are strictly prohibited.
Vico MT (E 863 GB)
01/10/2021
Product Description
14
Advertisement
Table of Contents
