Yamaha YZ85W1 Service Manual page 149

SWINGARM AND DRIVE CHAIN
2. Install:
• bearing
• oil seal
(with the relay arm)
NOTE: NOTE:
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
3. Install:
• bearing
• oil seal
(with the connecting rod)
NOTE: NOTE:
• Apply the molybdenum disulfide grease on
the bearing when installing.
• Install the bearing by pressing it on the side
having the manufacture's marks or numbers.
4. Install:
• connecting rod
4-77
CHAS
Installed depth of bearings
Depth : 4.5 mm (0.18 in)
Depth : 0.5 mm (0.02 in)
Depth : 4.0 mm (0.16 in)
Installed depth of bearings
6.5 mm (0.26 in)
53 Nm (5.3 m•kg, 38 ft•lb)