fantastic furniture Cove Manual page 6

Step 3
You will need
4 x Cam Bolts Phillips Head
(H3) Screwdriver
Attach 4 x Cam Bolts (H3) to Left Side Panel (P3) and Divider (P5) by
tightening with the Phillips Head Screwdriver.
Step 4
You will need
4 x Dowels 4 x Cam Nuts
(H1) (H4)
Phillips Head
Screwdriver
This is how a cam nut works........
The head of the cam
bolt goes into the
open mouth of the
cam nut. You then
turn the cam nut so
it tightens over the
bolt.
Insert 4 x Cam Nuts (H4) and 4 x Dowels (H1) into Shelf Panel (P13) as shown.
Rotate the cam nuts so the arrow points towards the incoming cam bolts.
Attach Divider (P5) and Left Side Panel (P3) to Shelf Panel (P13) by tightening
with the Phillips Head Screwdriver.
fantasticfurniture.com.au
(P5)
(P5)
(P3)
(P3)
(P13)
Page 6