Nilfisk-Advance Advance SC3000 Instructions For Use Manual page 10

ENGLISH
STEERING WHEEL WITH CONTROL PANEL
51. Reverse gear activation/deactivation lever
52. Reverse gear LED indicator
53. Detergent flow control push-button
54. Washing detergent flow control LED indicator
55. Mute function push-button
56. Mute function LED
57. Horn push-button
58. Ignition key
59. Solution flow increase push-button
60. Solution flow decrease push-button
61. Solution flow LED indicator
62. Battery warning LED
• Green warning LED - charged battery
• Yellow warning LED - semi-discharged battery
• Red warning LED - discharged battery
63. Vacuum system push-button
64. Vacuum system LED indicator
65. Extra pressure push-button
66. Extra pressure LED indicator
67. One-Touch™ Scrub ON/OFF push-button
68. One-Touch™ LED indicator
• Flashing LED: Brushes deck and squeegee moving up/
down
• Steady LED: Ready for work
71
68
67
65
69
66
63
64
8
INSTRUCTIONS FOR USE
70
61
60
SC3000 26 D - 9098827000
69. EcoFlex activation/deactivation lever
70. EcoFlex system LED indicator:
• LED on - EcoFlex system on
• LED flashing - EcoFlex system override
• LED off - EcoFlex system disabled
71. Hour counter and solution level display:
• When the machine is started, it displays for a few
seconds the number of working hours which have been
performed.
• While using the machine, it displays the solution/
washing water level in the tank (in gallons).
• When the level is above 18 US gal, the display
indicates "FUL".
• When the level is under 4 US gal, the display indicates
"LO".
• When the tank is almost empty, "LO" starts flashing.
NOTE
The display could indicate "LO" even if the tank is
not completely empty, thus allowing to complete
the cleaning cycle; in any case, it is recommended
to check the actual solution flow supplied to the
brushes.
72. Anti-skid control activation LED indicator
72 52
62
59
revised 03/2018
54
53
56
55
51
57
58
P100360
10/2010