ATEN CM1942 User Manual page 18

CM1942 User Manual
No. Component
3 port selection
pushbuttons
Front View
4 audio jacks
5 USB 3.1 Gen 1
Type-A port
Rear View (Console Ports Section)
6 USB 2.0 Type-A
ports
7 HDMI out
8 audio jacks
9 USB 3.1 Gen 1
Type-A port
10 power jack
11 remote port
selector jack
Rear View (KVM Ports Section)
12 DisplayPort in
6
For manual port selection (see Manual Switching, page 11):
Press a switch for less than two seconds to bring the KVM,
USB hub, and audio focus to the computer attached to its
corresponding port.
Press a port selection pushbutton for longer than two sec-
onds to only bring the KVM focus to the computer attached
to its corresponding port.
Press a port selection pushbutton twice to bring the audio
focus to the computer attached to its corresponding port.
Press port selection pushbuttons 1 and 2 simultaneously
for 2 seconds to start Auto Scan Mode (see Boundless
Switching with a Mouse Cursor, page 19).
Your main console microphone and speakers plug in here.
Note: The microphone and speakers plugged into the front
panel have priority over those plugged into the rear panel.
USB peripherals (printers, scanners, drives etc.) plug into this
port. This USB 3.1 Gen 1 port features 5 Gbps data transfer
rates for compatible USB peripherals.
The cables from your keyboard (6), mouse (6), monitors (7),
microphone (8), and speakers (8) plug in here. Each
connector is marked with an appropriate icon to indicate
itself.
USB peripherals (printers, scanners, drives etc.) plug into this
port. This USB 3.1 Gen 1 port features 5 Gbps data transfer
rates for compatible USB peripherals.
The power adapter cable plugs into this jack.
The remote port selector plugs in here.
The monitor cables that link the switch to your computers
plug in here. Each KVM port section is comprised of a
microphone jack, speaker jack, USB Type-B port, and two
DisplayPort connectors.
Description