ATEN CM1942 User Manual page 48

2-port 4k displayport dual display mini-matrix boundelss kvm switch

Hide thumbs Also See for CM1942:

Table of Contents

CM1942 User Manual

4. Press and hold the mode pushbutton and remote port selector pushbutton.

5. While holding the mode pushbutton and remote port selector pushbutton,

connect the USB Type-B connector into the any available USB Type-B

socket from the KVM ports section.

6. Connect the USB Type-A connector to a USB Type-A port on the

computer.

7. Power on the CM1942. The port LEDs flash orange together to indicate

Firmware Upgrade Mode is in effect.

You can also connect a keyboard to the console port and invoke the

Firmware Upgrade Mode via hotkey. See Firmware Upgrade Mode,

page 24.

Note: While the CM1942 is in Firmware Upgrade Mode, normal keyboard

and mouse functions are suspended. You must complete the

firmware upgrade or exit Firmware Upgrade Mode to regain normal

control of the console.

Table of Contents