Raisecom Gazelle S2028i Manual page 50

Table of Contents

Advertisement

Raisecom
Gazelle ST2028i (A) Hardware Description
Grounding
cable
H
Half duplex
I
IEEE
Industrial
Ethernet
switch
L
Link
Aggregation
M
Multi-mode
fiber
Q
QinQ
R
RS232
S
Connecting the device to the ground, usually a yellow/green coaxial cable
In a communication link, only one party can send data at a time.
American Institution of Electrical and Electronic Engineers
Developed for applications in the industry. Compared with traditional
business Ethernet switch, the industrial Ethernet switch is cost/effective,
with stable and closed chassis design, no fan for dissipation, power input
overloading, overcurrent detection, EMC, etc. it can adapt to severe and
dangerous industrial environments, such as mining, power grid, and
railway.
A computer networking term which describes using multiple network
cables/ports in parallel to increase the link speed beyond the limits of any
one single cable or port, and to increase the redundancy for higher
availability.
In this fiber, multi-mode optical signals are transmitted.
QinQ is (also called Stacked VLAN or Double VLAN) extended from
802.1Q, defined by IEEE 802.1ad recommendation. Basic QinQ is a
simple layer-2 VPN tunnel technology, encapsulating outer VLAN Tag
for client private packets at carrier access end; the packets take double
VLAN Tag passing through trunk network (public network). In public
network, packets only transmit according to outer VLAN Tag, the private
VLAN Tag are transmitted as data in packets.
In synchronization transfer mode, no handshaking signals, able to
communicate with RS232 or RS422 devices point to point, in transparent
transmission, with a maximum rate of 19.2 Kbit/s
Raisecom Proprietary and Confidential
Copyright © Raisecom Technology Co., Ltd.
6 Appendix
40

Advertisement

Table of Contents
loading

Table of Contents