Table of Contents
Advertisement
if Sprayer is not properly cleaned and lubricated immediately after every use.
Clean and lubricate Sprayer immediately to prevent permanent damage.
3. WARNING – To reduce the risk of skin injection:
a. Do not aim the gun at, or spray
any person or animal.
b. Keep hands and other body parts away
from the discharge. For example, do not try
to stop leaks with any part of the body.
c. Always use the nozzle tip guard. Do not
spray without nozzle tip guard in place.
d. Only use a nozzle tip specified
by the manufacturer.
e. Use caution when cleaning and changing nozzle
tips. In the case where the nozzle tip clogs while
spraying, follow the manufacturer s instructions
for turning off the unit and relieving the pressure
before removing the nozzle tip to clean.
f. Do not leave the unit energized or under
pressure while unattended. When the
unit is not in use, turn off the unit and
relieve the pressure in accordance with
the manufacturer s instructions.
g. High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. In the event that injection occurs,
seek medical attention immediately.
Work Area
1. Keep the work area clean and well lighted.
Cluttered benches and dark areas increase the
risks of electric shock, fire, and injury to persons.
2. Operate only in a well-ventilated area.
Paint thinners and solvents may
be harmful if inhaled.
Electrical Safety
1. Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
Item 58520
RETURNS NOT ACCEPTED & WARRANTY VOID
For technical questions, please call 1-888-866-5797.
h. This system is capable of producing 2000 psi.
Only use replacement parts or accessories
that are specified by the manufacturer and
that are rated a minimum of 2000 psi.
i. Always engage the trigger lock
when not spraying. Verify the trigger
lock is functioning properly.
j. Verify that all connections are secure
before operating the unit.
k. Know how to stop the unit and bleed pressure
quickly. Be thoroughly familiar with the controls.
4. WARNING – To reduce the risk of injury:
a. Always wear appropriate gloves, eye protection,
and a respirator or mask when painting.
b. Do not operate or spray near children. Keep
children away from equipment at all times.
c. Do not overreach or stand on an
unstable support. Keep effective
footing and balance at all times.
d. Stay alert and watch what you are doing.
e. Do not operate the unit when fatigued or
under the influence of drugs or alcohol.
3. Do not operate the sprayer in explosive
atmospheres, such as in the presence of
flammable liquids, gases, or dust.
The sprayer is able to create sparks resulting
in the ignition of the dust or fumes.
4. Keep bystanders, children, and visitors away
while operating the tool. Distractions are
able to result in the loss of control of the tool.
2. Do not expose sprayers to rain or wet
conditions. Water entering a sprayer will
increase the risk of electric shock.
Page 3
Advertisement
Table of Contents
