Table of Contents
Advertisement
if Sprayer is not properly cleaned and lubricated immediately after every use.
Clean and lubricate Sprayer immediately to prevent permanent damage.
Operating Instructions
Read the ENTIRE IMPORTANT SAFETY INFORMATION section
at the beginning of this manual including all text under subheadings therein
before set up or use of this product.
INJECTION HAZARD!
Although this paint gun is airless, it still puts out paint at a very high pressure. Through
improper use, paint can be injected through a person's skin, leading to serious injury,
possibly amputation. If paint is accidentally injected into someone's skin, contact a doctor
immediately. Do not treat an injection injury as a simple cut. Injection can lead to amputation and
requires immediate surgical treatment. Inspect tool before use, looking for damaged, loose, and
missing parts. If any problems are found, do not use tool until repaired.
Charging
Charge battery after unpacking and before using this tool. Follow instructions included with battery charger.
Lock/Unlock Trigger
WARNING! TO PREVENT SERIOUS INJURY: Risk of Injection
- Set Trigger Lock when Spray Gun not in use.
1. Push Trigger Lock to the right to lock Trigger.
2. Push Trigger Lock to the left to unlock Trigger.
Depressurize Sprayer
WARNING! TO PREVENT SERIOUS INJURY: Risk of Injection - Unit maintains pressure after
shut-down - Before servicing, cleaning, or removing any part, shut off power and relieve pressure.
Refer to this section when instructed to depressurize sprayer.
1. Lock Trigger.
2. Remove Battery.
3. Open Prime/Spray Valve.
4. Close Prime/Spray Valve.
Page 10
RETURNS NOT ACCEPTED & WARRANTY VOID
For technical questions, please call 1-888-866-5797.
Trigger
Lock
Trigger
Prime/Spray
Valve
Item 58520
Advertisement
Table of Contents
