Table of Contents
Advertisement
if Sprayer is not properly cleaned and lubricated immediately after every use.
Clean and lubricate Sprayer immediately to prevent permanent damage.
Cup Support Adapter
To prevent tipping when using large battery, attach
Cup Support Adapter to bottom of Paint Cup.
Filling Paint Cup
WARNING! TO PREVENT SERIOUS INJURY: Only water-based materials or materials with
a minimum flash point of 38°C (100°F) should be used for spraying and cleaning.
water or mineral spirits for cleaning. Only use water-based or oil-based paint for spraying.
1. Remove Paint Cup and insert clean Cup Liner.
2. Pour paint into Cup Liner.
3. Replace Paint Cup, tighten securely.
4. Open Air Bleed Valve, squeeze Liner until
reservoir inside Air Hole is filled with paint.
5. Close Air Bleed Valve.
Page 12
RETURNS NOT ACCEPTED & WARRANTY VOID
For technical questions, please call 1-888-866-5797.
Paint
Cup
Cup
Support
Adapter
Air
Hole
Air Bleed
Valve
6. Spray according to Spraying on page 13.
NOTE: Dispose of solvent, paint and waste
according to local hazardous waste standards.
Only use
Item 58520
Advertisement
Table of Contents
