Table of Contents
Advertisement
if Sprayer is not properly cleaned and lubricated immediately after every use.
Clean and lubricate Sprayer immediately to prevent permanent damage.
Spray Tip and Nozzle Guard
Attach
1. Seat Seal on end of Spray Tip, then insert
Seal into back of Nozzle Guard.
2. Insert Spray Tip, then rotate a full turn to align Seal.
Remove
1. During operation: Remove Spray Tip from Nozzle
Guard, then remove Nozzle Guard from Spray Gun.
2. During cleaning or changing tip size: Remove
Spray Tip from Nozzle Guard, then remove
Nozzle Guard from Spray Gun. Insert Spray
Tip into front of Nozzle Guard to remove Seal.
Item 58520
RETURNS NOT ACCEPTED & WARRANTY VOID
Nozzle
Guard
Seal
Spray
Tip
SPRAY
For technical questions, please call 1-888-866-5797.
3. Remove Tip, then thread Nozzle Guard onto
Spray Gun. Turn nut by hand until almost tight,
then holding nut and Nozzle Guard together,
tighten completely. Do not overtighten.
• Attach horizontally for horizontal spray pattern.
• Attach vertically for vertical spray pattern.
4. Install Tip into Nozzle Guard, then rotate
until SPRAY end is facing forward.
SPRAY
SPRAY
Page 17
Advertisement
Table of Contents
