Advertisement
Quick Links
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
For Best Results,
For Best Results,
Use 3.0 Amp Hour Battery
Use 3.0 Amp Hour Battery
(Sold Separately)
(Sold Separately)
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2021 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
21h
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Bauer 21505C-B
Summary of Contents for Bauer 21505C-B
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Table Of Contents
Table of Contents Safety ............2 Maintenance ..........8 Specifications ..........5 Parts List and Diagram ......10 Setup ............5 Warranty ............ 12 Operation ............ 7 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. -
Page 3: Safety
Lithium Battery Safety Warnings 2. DO NOT DO ANY OF THE FOLLOWING TO THE BATTERY PACK: a. Open, b. Drop, c. Short-circuit, d. Puncture, e. Incinerate, or LITHIUM BATTERIES STORE A f. Expose to temperatures greater than 265°F. LARGE AMOUNT OF ENERGY 3. - Page 4 Vibration Hazard This appliance vibrates during use. 2. Do not smoke during use. Nicotine reduces Repeated or long-term exposure to vibration may the blood supply to the hands and fingers, cause temporary or permanent physical injury, increasing the risk of vibration-related injury. particularly to the hands, arms and shoulders.
-
Page 5: Specifications
Specifications Bauer 20V 3.0Ah Li-Ion Battery Battery Type Pack (64816, sold separately) Bauer 20V 3.0A Li-Ion Charger Charger Type (57006, sold separately) Tank Capacity 4 Gallon Working Pressure Up to 90 PSI Hose Length 53″ Set Up Instructions Read the ENTIRE IMPORTANT SAFETY INSTRUCTIONS section at the beginning of this manual including all text under subheadings therein before set up or use of this product. - Page 6 Assembly 1. Insert Handle into Spray Wand. Note: If necessary, loosen Nut holding the Spray Wand and Handle. Rotate the Wand until it is aligned with the 2. Slide Nut onto threaded coupling and hand nozzle pointing downward. Retighten the Nut by hand. tighten securely.
-
Page 7: Operation
Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this manual including all text under subheadings therein before set up or use of this product. Battery Charging Charge Battery after unpacking and before using this tool. Follow instructions included with battery charger (sold separately). -
Page 8: Maintenance
Maintenance and Servicing Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ACCIDENTAL OPERATION: Make sure that the Power Switch/Trigger is in the off-position and unplug the tool from its electrical outlet before performing any procedure in this section. TO PREVENT SERIOUS INJURY FROM TOOL FAILURE: Do not use damaged equipment. - Page 9 PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
-
Page 10: Parts List And Diagram
Parts List and Diagram Parts List Part Description Part Description Lid Assembly Motor Press Plate Screw Screw Lid Handle Hose Clamp 2 Duct, 110 mm Check Valve Spring Filter Assembly Pressure Cap Seal Ring Battery Enclosure Assembly Filter Cartridge Shaft Suction Tube Assembly Battery Cover Suction Tube... - Page 11 Assembly Diagram Continued Item 58671 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Warranty
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase. This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, normal wear and tear, or to lack of maintenance.
Need help?
Do you have a question about the 21505C-B and is the answer not in the manual?
Questions and answers