Windows 10 Installer
1. In your Downloads folder, double-click the .zip
file to extract it, then double-click the .exe file
to start the installation process.
2. Click Next through all steps, then click Finish
at the final step.
3. You should restart your computer immediately.
Firmware Update
If Boom's firmware requires a firmware update, the
notification at right is displayed after the installation.
1. Quit Apogee Control 2 and any audio apps.
2. Disconnect Boom's USB cable from the computer.
3. Press and hold down Boom's Control knob while
re-connecting its USB cable to the computer.
4. Once the "Found Boom in firmware update mode"
dialog appears, release the Control knob.
5. Click "Yes" in the "Found Boom..." dialog. Once the
"Firmware update complete!" dialog appears, click Ok.
Boom will re-initialize.
9
Apogee Boom User's Guide