PTO™ MOD3
Status
Status
Connects
Comp Chg
Part Chg
Comp EQ
Part EQ
kAh Return
Batt Disconn
DF1 etc.
Modules
The module status is listed in ascending order from 1 to 3 or 1 to 6, numbered from left to right.
<OK> the module is inserted and functioning properly.
<Fault> if a module is inserted in this slot, contact a servicing agent.
<Unavailable> there is no module inserted in this slot.
Module LED Status
The modules have LED indicators on the front. These can be observed to determine the status of that particular module:
Flashing Green: Module in Standby
Solid Green: Module in Use
Red: Module Fault
No LEDs: Module Fault (assuming not in energy saver mode)
Owner's Manual
Total number of times a battery was connected during the life of the charger.
Total number of charges normally completed.
Total number of charges terminated before completion.
Total number of equalizes normally completed.
Total number of equalizes terminated before completion.
Total number of amp hours returned over the life of the charger.
Total number of times a battery was disconnected during the life of charger.
Number of faults recorded over the life of the charger. (see fault codes)
Description
23
AM-HPTOM3-OM
Rev AB February 2020