Time; Dst (Daylight Savings Time); Language; Units - Hawker PTO MOD3 Owner's Manual

Table of Contents

Advertisement

PTO™ MOD3

Time

Sets the time of the charger (24 Hr Clock).
DST (Daylight Saving Time)
Enable or disable automatic clock adjustment for daylight saving time. When enabled, time will
move ahead one hour at 02:00 on the second Sunday in March and will move back one hour at
02:00 on the first Sunday of November. The charger must be powered up at the time of the change
for it to take effect.

Language

Selects the language displayed in the menus.

Units

Selects Metric or English units for temperature, length and cable gauge.

Display Contrast

Adjusts the brightness of the LCD display.
This is where the password is entered to gain access to service level menus by authorized Hawker
service personnel.
1. Use the Up/Down buttons to select the correct alphanumeric character.
2. Use the Left/Right buttons to move the cursor either left or right.
3. Once the correct password is entered press the Select.
If the correct password is entered the display will automatically jump to the main menu with the
service level menu displayed.
System Setup

• Enter Password

• Change Password

• USB
• Charge Prof. Config
• Constant Current
• Equalize
• Start Charge
• Post Charge
• Charger Config
CHANGE PASSWORD
Enter the current password used to get the above menu. If the password is entered correctly the
display will ask to enter a new password. After a new password is entered press the Enter
button. Don't forget the new password or you will not be able to get into the charger settings
anymore.
Owner's Manual
ENTER PASSWORD
MAIN MENU
14
AM-HPTOM3-OM
Rev AB February 2020

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptom1Ptom3Ptom3c

Table of Contents