Modules; Module Status Display; Info; Module Information - Hawker LIFESPEED MOD3 Owner's Manual

LIFESPEED MOD3
This displays the status of each module installed in the charger. From main menu, press
Charger button, then press Modules button. If
Module 1 below), this indicates the module is operating properly. If
the module, this indicates a fault. Contact your servicing agent.

Info

Displays details about each module installed.

Module LED Status

The modules have LED indicators on the front. These can be observed to determine the
status of that particular module:
Flashing Green: Module in Standby
Solid Green: Module in Use
Red: Module Fault
No LEDs: Module Fault (assuming not in energy saver mode)
Owner's Manual

Module Status Display

is displayed under the module (shown as
28
AM-HLSM3-OM
Rev AB October 2019
is displayed under