Dimplex DX 512E Installation And Operating Instructions Manual page 12

English
5.4.3. Frost protection
In MANUAL OFF operating mode and Auto operating
mode (time block OFF), frost protection takes place. If
the room temperature is 5° C or less, the heating de-
vice is switched on automatically.
5.4.4. Adaptive startup
This function guarantees that, in automatic mode
(week program), the set room temperature is achieved
exactly at the start of the switch-on time.
Example:
In the timer menu, a set room temperature of 22°C is
specified. The current room temperature is 17° C. The
heating device switches on early so that the specified
room temperature of 22° C is reached by 07:00.
Use the MODE key to select the operating mode

AUTO.
Press and hold the + key and the - key for three

seconds.
ECO appears.

Activate/deactivate the function with the + / - keys:

ON = Adaptive startup activated,
OFF = Adaptive startup deactivated.
Press the ENTER key. Setting is saved.

EN-12
5.5. Options
5.5.1. Key lock
This function can be used to lock the operating ele-
ments.
Press and hold the ENTER key and the MODE key

for one second.
The LOCKED key symbol appears in the display.

To unlock, press and hold the ENTER key and the

MODE at the same time again.
NOTE
No settings can be made if the key lock is activated.
5.5.2. Advance
In automatic mode, the next time block can be se-
lected early. The set time block then switches from
OFF to ON or vice versa.
Press and hold the + key for three seconds.

ADVANCE flashes.
Operating display on the left side of the screen

switches from OFF to ON or vice versa.
Activating / deactivating the ADVANCE function
Press the - key. ADVANCE disappears.

2204/A
DX 512E, DX 520E, DX 530E
www.dimplex.eu