Dimplex DX 512E Installation And Operating Instructions Manual page 11

DX 512E, DX 520E, DX 530E
5.4.2. Automatic mode (week program)
NOTE
For extended operation, it is advisable to use the
AUTO operating mode to reduce the operating costs.
Four times blocks are available per day. These can be
adapted individually for each weekday.
Select AUTO operating mode by pressing the

MODE button.
Press the PROG key.

WEEKDAY display flashes.
Order from top to bottom:
M = Monday, T = Thursday,
T = Tuesday, F = Friday,
W = Wednesday,
Use the +/- keys to set the weekday.

Setting time block ON
Press the ENTER key. P1 (program 1) and ON ap-

pears. The hours display flashes.
Use the +/- keys to set the hours. Press the ENTER

key. The minutes display flashes.
Use +/- to set minutes (in 10 minute increments).

Setting time block OFF
Press the ENTER key. P1 (program 1) and OFF ap-

pears. The hours display flashes.
Use the +/- keys to set the hours. Press the ENTER

key. The minutes display flashes.
Use the +/- keys to set the minutes.

www.dimplex.eu
Temperature setting



The programs P2, P3 and P4 can be set in the same
way.
To exit the program early, press the PROG key.
Copying programs
S = Saturday,
To copy the newly set programs P1 - P4 to other days,
S = Sunday.
proceed as follows.



2204/A
Press the ENTER key. Temperature setting ap-
pears.
Use the +/- keys to set the temperature.
Press the ENTER key. P2 (program 2) and ON ap-
pears. The hours display flashes.
NOTE
After carrying out the Temperature Setting, press
and hold the ENTER key until COPY appears.
Press + to select more weekdays.
The selected weekdays are marked with a triangle
displayed permanently. The days Monday to Fri-
day are selected on the screen at the top.
Deselect weekdays with the - key.
Press the ENTER key. The settings are saved.
COPY flashes three times.
Setting is complete.
English
EN-11