Setting Up Your Network Using The Point And Print Method - Lenovo M720 Manual

Setting up your network using the point and print
method
With this method, the printer driver is partially installed on each of the client
computers networked to the host computer. The host computer controls
driver modifications and handles the print job processing.
1
Follow the instructions on the Lenovo M720 Setup sheet to install
the hardware and software on the host computer.
2
Make sure the host computer is shared. For help, see "Sharing the
printer from the host computer" on page 42.
3
From the clients computer, double-click Network Neighborhood,
My Network Places, or My Network (depending on your operating
system).
4
Find the host name of the server and look for the shared name you
assigned to the printer. For help, see "Locating the printer from the
client computer" on page 43.
5
Right-click the printer (All-In-One) icon, and then select Open,
Install, or Connect (depending on your operating system).
41