Table of Contents
Advertisement
General Data
Unit Description
The 155 to 500 ton (60 Hz) model RTAC units are helical-
rotary type, aircooled liquid chillers, designed for outdoor
installation. The compressor circuits are completely
assembled, hermetic packages, that are factory-piped,
wired, leak-tested, dehydrated, and tested for proper
control operation before shipment.
Note: Packaged units are factory charged with refrigerant
and oil.
Trane Rental Services rental equipment also includes a
chilled water pump, shore power, leveling system, and
piping and electrical connection points.
Receiving Checklist
To protect against loss due to damage incurred in transit,
complete the following checklist upon receipt of the unit:
•
Inspect individual pieces of the shipment before
accepting the unit. Check for obvious damage to the
unit or packing material.
•
Confirm all (4) leveling jacks are with unit. Trailer
mounted units may have jacks placed in one of the
RTAC-SVX005A-EN
boxes underneath the trailer. F2-F4 RTAC's have jacks
that are stored in a different position for shipping vs.
installation. These must be relocated on the chiller
uprights or rear trailer mounting location in order to
allow for proper travel of the jack.
•
Check the unit for concealed damage before it is stored
and as soon as possible after delivery. Concealed
damage must be reported within 15 days.
•
If concealed damage is discovered, stop unpacking the
shipment. Do not remove damaged material from the
receiving location. Take photos of the damage, if
possible. The owner must provide reasonable evidence
that the damage did not occur after delivery.
•
Notify the carrier's terminal of damage immediately by
phone and by mail. Request an immediate joint
inspection of the damage by the carrier and the
consignee.
•
Notify the Trane sales representative and arrange for
repair. Do not repair the unit, however, until damage is
inspected by the carrier's representative.
5
Hide quick links:
Advertisement
Table of Contents
