Dimensions And Weights; Unit Assembly Dimensions And Weights; Handling - Trane RTAC Installation, Operation And Maintenance Manual

Dimensions and Weights

Unit Assembly Dimensions and
Weights
RTAC assembly weights are provided in

Handling

Units 300 tons and larger are shipped on a flat bed trailer
and will permanently remain on the trailer for rental.
Units 250 tons and smaller can be left on the trailer or
removed for rental. Wide forklift trucks should use the
forklift pockets to remove units. Reference unit weights to
determine capacity. Units can also be lifted by an
overhead-lifting frame and spreader bars.
Table 1. Unit weights
Chiller Max
Unit Size
Dry Weight
(Tons)
(lbs)
18,000
155
18,350
170
200 20,400
24,000
250
8
Table 1, p. 8.
Operational Trailer
Weight (lbs) Weight (lbs)
18,300
—
18,700
—
20,800 —
24,650
—
Table 1. Unit weights (continued)
Chiller Max
Unit Size
Dry Weight
(Tons)
(lbs)
28,000
300
35,800
400
500 36,000
WARNING
Heavy Object!
Failure to follow instructions below could result in
unit dropping which could result in death or serious
injury, and equipment or property-only damage.
Ensure that all the lifting equipment used is properly
rated for the weight of the unit being lifted. Each of the
cables (chains or slings), hooks, and shackles used to
lift the unit must be capable of supporting the entire
weight of the unit. Lifting cables (chains or slings)
may not be of the same length. Adjust as necessary
for even unit lift.
Operational Trailer
Weight (lbs) Weight (lbs)
28,900 14,760
36,900 14,760
37,200 14,760
RTAC-SVX005A-EN