Setting Of Warning Sign For Safety; Measuring Equipment; Moisture Protection; Operation After Power Failure - Alpha ESS SMILE-BAT-G3-10.1P Instruction Manual

Reminds operators to refer to the documentation provided with the equipment.
Rappelle aux opérateurs de se référer à la documentation fournie avec l'équipement.

Setting of Warning Sign for Safety

While instructing, maintaining and repairing, in case of preventing unrelated personnel
nearby to cause incorrect operation or accident, the opinions below should be followed:

Obvious signs should be set at front switch and rear-level switch in case of accidents
caused by false switching.

Warning signs or tapes should be set near operating areas.

The system must be reinstalled after maintenance or operation.

Measuring Equipment

For ensuring the electrical parameters to match requirements, related measuring
equipment are required when the system is being connected or tested.
Ensure that the connection and use matches specification in case of electric arc or shock.

Moisture Protection

It is very likely that moisture may cause damages to the system.
Repair or maintaining activities in wet weather should be avoided or limited.

Operation After Power Failure

The battery system belongs to energy storage system, and it keeps fatal high voltage even
the DC side is disconnected. Therefore, touching the output of the battery is strictly
prohibited.
The Inverter maintains fatal voltage even both the DC or AC side are disconnected, so it
must be tested by multimeter for safety before operation.

Battery Safety Datasheet

1.3.8.1 Hazard Information
Classification of the hazardous chemical
Lithium Iron Battery is Exempt from classification according to Australian WHS regulations.
______________________________________________________________________
Introduction
Alpha ESS Co., Ltd.
Your Smart Energy
Page 7 of 29