Your Smart Energy
After the equipment are out of operation, the following notes should be paid attention to
while maintaining:
Related safety standards and specifications should be followed in operation and
maintenance.
Disconnect all the electrical connections so that the equipment would not be powered
on.
Wait at least 5 minutes after disconnection in case that the residual voltage of
capacitors down to safe voltage. Use a multi-meter to ensure the equipment is completely
uncharged.
The equipment should be repaired by professional staff and it is strictly for-bidden for
maintenance staff to open equipment on their own.
Appropriate protective measures should be taken while maintaining, such as insulated
gloves, shoes, and anti-noise ear plugs.
Life is priceless. Make sure no one would get hurt first.
The batteries need to be charged to 30%~50%SOC rate when the whole sys-tem is
static (that is, the batteries have not been charged for two weeks or longer) for a long time,
in case of over discharge.
Please contact us in time if there are any conditions that could not be explained in the
manual.
______________________________________________________________________
Page 26 of 29
Routine Maintenance
Alpha ESS Co., Ltd.