General Precautions - Alpha ESS SMILE-BAT-G3-10.1P Instruction Manual

General Precautions

WARNING
Risk of chemical burns from electrolyte or toxic gases.
During standard operation, no electrolyte shall leak from the battery pack and no toxic gases shall
form. Despite careful construction, if the Battery Pack is damaged or a fault occurs, it is possible that
electrolyte may be leaked or toxic gases formed.

Do not install the system in any environment of temperature below -10° C or over 50° C and
in which humidity is over 85%.

Do not touch the system with wet hands.

Do not put any heavy objects on top of the system.

Do not damage the system with sharp objects.

Do not install or operate the system in potentially explosive atmospheres or areas of high
humidity.

Do not mount the inverter and the battery pack in areas containing highly flammable
materials or gases.

If moisture has penetrated the system (e.g. due to a damaged enclosure), do not install or
operate the system.

Do not move the system when it is already connected with battery modules.

Secure the system to prevent tipping with restraining straps in your vehicle.

The transportation of AlphaESS SMILE-BAT-G3-10.1P must be made by the manufacturer
or an instructed personal. These instructions shall be recorded and repeated.

A certified ABC fire extinguisher with minimum capacity of 2kg must be carried along when
transporting.

It is totally prohibited to smoke in the vehicle as well as close to the vehicle when loading
and unloading.

For the exchange of a battery module, please request for new hazardous goods packaging
if needed, pack it and let it be picked up by the suppliers.

In case of contact with electrolyte, rinse the affected areas immediately with water and
consult a doctor without delay.
______________________________________________________________________
Introduction
Alpha ESS Co., Ltd.
Your Smart Energy
Page 9 of 29