Intermec MobileLAN access 2102 S User Manual page 26

MobileLAN access 2102 S User's Guide
To configure the 2102 S access point as a DHCP server
1. Establish a Web browser session. For more information, see "Establishing a Web
2. Click TCP/IP Settings and configure the following parameters:
3. Enable the server.
4. Configure the DHCP server.
2-6
Browser Session" on page 2-3.
Subnet mask
Static IP address
a. In the TCP/IP Settings screen, click the DHCP Mode down arrow and choose
This AP is a DHCP Server.
b. Click Submit Changes and follow the instructions that appear on your screen to
save your changes.
a. Click DHCP Server Setup. The DHCP Server Setup screen appears.
b. Configure the DHCP server. When you are finished, click Submit Changes and
follow the instructions that appear on your screen to save your changes.
The table on the next page explains each parameter.